DPA d:screet Necklace Mic Review


In the topsy turvy world of global capitalism you can never take anything for granted. Personal mics for instance, when I was a nipper Sony ruled the roost, the ECM was the hoover or the kodak of the market, synonymous with the very idea of a personal mic. So I spent many a happy hour fiddling with ECMs, clips and ties back in the day. And I jokingly used to say, “I wish Sony would make a tie with a built in mic, make my life much easier.” Sadly Sony weren’t listening and the world was spared the literal ‘tie-mic’. However many moons later DPA (who are now synonymous with high quality personal mics) have come up with an idea not a million miles away from a ‘neck-worn’ microphone. The DPA d:screet Omni Necklace, yes a microphone as fashion accessory.

So what has driven this innovative new take on the personal microphone? Well the rise of Big Brother driven reality TV. The idea is that on some gigs you won’t have a tame SA2 to fit mics properly and your talent may not have enough experience (or indeed intelligence) to fit a mic with a clip or cage. And in reality TV there probably won’t even be a tie or handy lapel to fit it to. So you need a system that lets the talent fit their own mics but in a way that is not as fiddly as a clip but still gets good sound, and just as important repeatable sound. With the necklace you have one thing to remember, the wire goes down your back. If the wire is down your front, like a tie, you have it on back to front. What could possibly go wrong!?

So reality TV or maybe a radio roundtable or corporate workshops or churches spring to mind as possible markets. The concept is simple, a well proven DPA capsule embedded in a necklace style fitting which is both robust, discrete and easy to fit.

The model I tried is a nice Bauhaus black with a silver coloured clip. The finish is smooth black plastic of good quality. I guess you want to be able to wipe this down easily and white and brown versions are both available. The clip is magnetic which helps middle aged men fumbling behind themselves for a clasp. Not something we are used to doing and an image I don’t recommend you hold on to. Once seated a simple rotation locks it in. It’s pretty much fool proof, till a gorilla stands on it, but then rule #1, don’t put your mics on the floor. You know that I know that, but the talent will never remember it. Keep the gorillas off your clips and of course your capsules.

And talking of gorillas, I have an eighteen inch neck and the necklace was an easy fit with an inch or so to spare. I had the 47cm version which is notionally about eighteen and a half inches. However if you are working on “The Munster front row reads the works of Louis MacNeice”, you may want to check out the 53cm version that will fit collar sizes up to about twenty one inches. Beyond that I suppose they could always wear it as a bicep mic!

The sound quality is, as you would expect from a DPA, excellent, mine came with the high boost grid which helps cut through the natural muffliness of being fitted at the neck. There’s no doubt your getting top drawer audio quality when you buy a DPA miniature microphone and the necklace is no different. You don’t have a huge choice of capsules, I suppose there’s not point in a directional mic given where it is fitted so the options are high and low sensitivity versions of the 4061.

If your talent is wearing something open necked I found no problems with physical noise, though you do have to watch it doesn’t ride round a bit under exertion. You might want to tape the ‘tail’ down to hold the capsule in the desired position. I did try the necklace under a buttoned up shirt or high collar and in this position it will be prone to material rubbing and the usual compromise in sound quality depending on the fabric of the clothing. So that is not really ideal.

And now to the vexed question of interfacing the DPA to your radio system. You have a few choices. DPA supply the mics with MicroDot connectors, these are from TE California and are a small coaxial connector from their S50 series. They seem to be much more reliable than their small size would indicate and because they are teeny tiny they’re ideally suited for the wide range of adapters that enable you to fit a MicroDot connector into just about any radio system. DPA have a bucket load of convertors, and if you take advantage of that approach then you can have MicroDots on all your mics and convertors to fit any radio system and maximum flexibility. As you might expect the convertors are not cheap but they are very well made and there is one that enables the Necklace to be plugged into a standard XLR. But what if you view tiny connectors with suspicion and consider convertors as yet another connection to fail? I rang my local DPA supplier, Martyn at SoundKit, and he assured me that you can have your Necklace supplied with a custom connector hard wired if that is what you require. And the fact that connectors get a whole paragraph just underlines the fact that we should have at most two standard fittings for radio mics, big and small. The current profusion is a joke. Gets off hobby horse, sightly red in face.

So do you need one? Well the necklace is a one trick pony, but it’s a good trick. You are getting the highest quality personal mic in a simple to fit package. If I was getting booked for twelve weeks of reality TV with eight radios and no provision for audio staff ‘on the floor’ for the whole shoot, I would be ordering mine now.

Leave a Reply

Your email address will not be published. Required fields are marked *